Yes, WiFi is a convenient and fast way to connect to the network, but sometimes there will be situations where you can connect to WiFi but can't get online. This is usually caused by network settings. A common solution is to restart the router and mobile phone, which can temporarily solve the network problem. If the problem still cannot be solved, you can try to modify the IP address, check the DNS server settings, or update the driver. If the problem still cannot be solved, you can contact the network service provider for more professional help. In short, there are many effective solutions to the problem of WiFi connection. It only takes a little time and patience to solve it.
When using WiFi to access the Internet, sometimes there may be situations where WiFi cannot connect or cannot access the Internet after connecting. At this time, restarting the router or manually setting the IP address is one of the common solutions. Restart the router: The router is the bridge between our equipment and the Internet. Sometimes the router may have some problems, such as overheating, system crash, etc. At this time, restarting the router can solve these problems. The method is to unplug the router, wait for dozens of seconds, then plug in the router, and wait for the router to restart. Before restarting the router, you can check whether other devices are connected to the router and can access the Internet normally. If other devices have the same problem, restarting the router may be a feasible solution. Set IP manually: If restarting the router does not solve the problem, you can consider setting the IP address manually. When connecting to WiFi, the device will automatically obtain an IP address, but sometimes the IP address cannot be obtained. At this time, you can manually set an IP address. The specific method is to find the IP address option in the network settings of the device, select to manually set the IP address, and then enter an available IP address, subnet mask, and default gateway. Generally, this information can be found in the router's management page. It should be noted that if none of the above methods can solve the problem, it may be necessary to further investigate the WiFi signal strength, equipment failure, network operator and other reasons to find a more accurate solution.
When using wireless network to connect mobile phones to the Internet, sometimes there may be problems that can't be connected or can't access the Internet after connecting. In this case, you can solve the problem by setting the IP address to static. The following are the specific steps: 1. Open the phone's setting interface, enter the "Wireless and Network" or "Network and Internet" option, and then find the "Wi-Fi" option. 2. In the Wi-Fi option, find the connected wireless network, press and hold the network, and select "Modify network". 3. In Modify Network Settings, find "IP Settings", the default is "DHCP", and change it to "Static". 4. In the static IP setting, enter an IP address, subnet mask and gateway address that are not used. Generally, this information can be found in the router management interface. 5. After completing the above steps, save the settings and exit, reconnect to the Wi-Fi network and try to access the Internet. At this time, if everything is normal, you should be able to successfully access the Internet. It should be noted that when using a static IP address, you need to ensure that the IP address entered does not conflict with other devices. In addition, the method of setting the static IP address may vary depending on the phone model or system version. If the above methods cannot solve the problem, it may be necessary to further investigate the router settings, network operators and other reasons to find a more accurate solution.